Life Science Filter

Protecting Life with Biosecurity Filtration

PARI HC High Throughput Cartridge Filters

  •  

    PARI HC high flux cartridge filter is made of polytetrafluoroethylene membrane (PTFE). It has natural hydrophobicity, excellent chemical compatibility and good temperature resistance. It is suitable for the decontamination and filtration of organic solvents.

     

    Product Feature

    • Highly controllable membrane size distribution and robust product performance

    • Natural hydrophobic which is suitable for filtration of organic solvents

    • High flux, high retention rate

     

    Applications

    • Organic solvent removal and filtration

PARI HC High Throughput Cartridge Filters
+
  • PARI HC High Throughput Cartridge Filters

Product Parameters

  • Filter Type

    dish filter

    capsule filter

    Cartridge filter

    Nominal size (inches

    φ50mm

    S

    2.5

    5

    10

    Specifications

    5

    10

    20

    30

    Filtration area
    (M²)

    single layer

    15cm ²

    180cm ²

    0.073

    0.23

    0.63

    D63
    D70

    0.25
    0.35

    0.50
    0.70

    1.0
    1.40

    1.50
    2.10

    filter pore size

    0.45 μm .0μm .2μm .45μm

     

    Structure material

    Support layer: Polypropylene (PP)
    Housing/End caps/Fins: Polypropylene (PP)
    Interface: Polypropylene (PP),222/226 with built-in stainless steel reinforcement
    Sealing ring: silicone rubber/EPDM/fluorine rubber/fluorine rubber
    Hot melt technology: hot melt sealing without adhesive
    Membrane material: hydrophobic polytetrafluoroethylene (PTFE)

     

    Maximum operating differential pressure

     

    Forward

     

    2bar(29psi)@ 20 ℃

    L 、 M:5bar(72.5psi)@ 20℃
    3bar(43.5psi)@50℃

     

    5bar(72.5psi)@25℃
    2bar(29psi)@ 80 ℃

    S:4bar(58psi)@20℃
    2bar(29psi)@ 50 ℃

    Reverse

    2bar(29psi)@ 20 ℃

    2bar(29psi)@ 20 ℃
    1.5bar(22psi)@50℃

    2bar(29psi)@ 25°C

    biological safety

    The structural components of this filter element meet the current USP<88> Class VI plastic biosafety requirements

    endotoxin

    The endotoxin level of the filter element flushing fluid tested by gel method <0.25EU/mL meets the requirements of USP<85>

Related components

Related Equipment

Message consultation


+86
  • +86 CN
Submit
%{tishi_zhanwei}%