Life Science Filter

Protecting Life with Biosecurity Filtration

LOPAC HC High Flux Cartridge Filter

  •  

    LOPAC HC high flux filter is made of PES membrane material for efficient liquid filtration. It has good hydrophilicity and low protein adsorption. It is suitable for the pre-treatment of process fluids to remove impurities.

     

    Product Features:

    • High asymmetric PES membrane with good hydrophilicity and high flux

    • Unique folding membrane technology with higher filtration area per unit

    • Excellent chemical compatibility

     

    Applications:

    • Pre-filtration for process fluids and buffers
    • Particle removal of process fluids

LOPAC HC High Flux Cartridge Filter
+
  • LOPAC HC High Flux Cartridge Filter

Product Parameters

  • Filter Type

    dish filter

    capsule filter

    Cartridge filter

    Nominal Size (inches)

    φ50mm

    S

    2.5

    5

    10

    Specifications

    2.5

    5

    10

    20

    30

    Filtration area
    (M²)

    single layer

    15cm ²

    180cm ²

    0.073

    0.23

    0.63

    D63
    D70

    0.11
    0.15

    0.23
    0.30

    0.45
    0.60

    0.901.20

    1.35
    1.80

    double layer

    15cm ²

    160cm ²

    0.065

    0.20

    0.60

    D63
    D70

    0.11
    0.15

    0.23
    0.30

    0.45
    0.60

    0.901.20

    1.35
    1.80

    filter pore size

    0.65μm

     

    Structure material

    Support layer: Polypropylene (PP)
    Housing/End caps/Fins: Polypropylene (PP)
    Interface: Polypropylene (PP),222/226 with built-in stainless steel reinforcement
    Sealing ring: silicone rubber/EPDM/fluorine rubber/fluorine rubber
    Hot melt technology: adhesive-free hot melt sealing
    Membrane material: hydrophilic polyethersulfone (PES)

    Maximum operating differential pressure

    Forward

    2bar(29psi)@ 20 ℃

    L, M:5bar(72.5psi)@ 20 ℃ 3bar(43.5psi)@ 50 ℃

    5bar(72.5psi)@25℃
    2bar(29psi)@ 80 ℃

    S:4bar(58psi)@20℃
    2bar(29psi)@ 50 ℃

    Reverse

    2bar(29psi)@ 20 ℃

    2bar(29psi)@ 20 ℃
    1.5bar(22psi)@50℃

    2bar(29psi)@ 25 ℃

    biological safety

    The structural components of this filter element meet the current USP<88> Class VI plastic biosafety requirements

    endotoxin

    The endotoxin level of the filter element flushing fluid tested by gel method <0.25EU/mL meets the requirements of USP<85>

Related components

Related Equipment

Message consultation


+86
  • +86 CN
Submit
%{tishi_zhanwei}%