Meltblown Cartridge

Endless Exploration, Boundless Opportunities

FCP High-Dirt Holding Melt-blown Cartridge

  •  

    High Strength Melt Blown Filter Cartridge directs fluid flow in the direction of its graded gradient (in both inflow and outflow directions, dependent on filtration medium). During filtration, the bigger apertures of the pores have sufficient space to hold bigger particulates, ensuring that the cartridge does not clog up too quickly. Smaller apertures stop smaller particulates, ensuring filtration efficiency, lower pressure difference, and increasing service lifespan.

     

    The combined effect of this graded gradient helps the cartridge to avoid the common pitfalls of high efficiency filters, such as rapid clogging and short service lifespan.

     

    Features:

    • Polypropylene melt blown element uses thin fiber, criss-crossing randomly to form a mesh with small pore diameter and high porosity to effectively control filtration precision

    • Low pressure loss, high flow rate and stable filtering accuracy

    • Long service lifespan and low filtration cost

    • Resistant to putridity, acid and alkali, organic or inorganic solvent (except chlorosulfuric acid, aquafortis and strong oxidant)

    • High quality non-toxic and odourless polypropylene material

    • Melt blown element does not secrete dissoluble material during operation 

FCP High-Dirt Holding Melt-blown Cartridge
FCP High-Dirt Holding Melt-blown Cartridge
FCP High-Dirt Holding Melt-blown Cartridge
FCP High-Dirt Holding Melt-blown Cartridge
+
  • FCP High-Dirt Holding Melt-blown Cartridge
  • FCP High-Dirt Holding Melt-blown Cartridge
  • FCP High-Dirt Holding Melt-blown Cartridge
  • FCP High-Dirt Holding Melt-blown Cartridge

Product Parameters

  • Maximum operating differential pressure: 1.18 bar @ 80°C (17.1 psid @ 176 °F)
    2.06 bar @ 60 °C (29,9 psid @ 140 °F)
    4.12 bar @ 21 °C (59.7 psid @ 70 °F)
    It is recommended to replace the differential pressure: 2.1 bar @ 21°C (30.5 psid @ 70 °F)
    1 bar @ 60 °C (14.5 psid @ 140 °F)
    Maximum operating temperature: 80 ℃
    Outer diameter: 63mm inner diameter 28mm

Related components

Related Equipment

Message consultation


+86
  • +86 CN
Submit
%{tishi_zhanwei}%