Life Science Filter
Protecting Life with Biosecurity Filtration
Sterilizing-grade gas filter AIREPAC SP
-
AIREPAC SP series sterilizing-grade gas filters are made of hydrophobic polyethersulfone (PES) membrane. They are specifically designed for single-use systems, delivering excellent performance in gas filtration and venting applications, especially in processes requiring irradiation sterilization. AIREPAC SP series is available in both disc and capsule formats, offering a full range of sizes and dimensions from small to large, flexibly meeting the needs of various application scenarios.
Product Features
-
Excellent hydrophobicity
-
Resistant to autoclaving and gamma irradiation
-
Reliable bacterial and particulate retention
-
High flux and low pressure drop
Typical Application
-
Single-use system application
-
Sterilization and filtration of compressed air, O2, N2, etc.
-
Air Breather Filter for Fermenters, Storage Tanks, and Dosing Tanks
AIREPAC SP Series Filter Selection Guide
1. Filter Specifications and Filtration Area
-
Disc Filters: Available in 20 cm² and 180 cm² filtration areas.
-
Capsule Filters: Available in 2.5, 5, and 10 inch nominal sizes, corresponding to 0.073 m², 0.23 m², and 0.63 m² filtration areas respectively.
-
Pore Size: Standardized at 0.22 μm for all models.
2. Pressure Tolerance (Maximum differential pressure)
-
Forward Pressure: ≤ 2 bar at 20°C.
-
Backward Pressure: ≤ 1.2 bar at 20°C.
3. Sterilization and Irradiation Tolerance
-
Irradiation: Resistant to ≤ 50 kGy.
-
Electron beam irradiation: Cannot be sterilized.
4. Performance and Regulatory Compliance
-
Bacterial Interception: > 10^7 cfu / cm² (B.diminuta, ATCC 19146).
-
Component Material Toxicity: Meets USP <88> Biological Reactivity for Class VI.
-
Ingredient Material Toxicity: Meets USP <88> Class VI plastics reaction test standards.
-
Cleanliness: Complies with FDA 21 CFR 211.72 and 210.3(b)(5)(6) for fiberless shedding filters, and USP <788> for insoluble particulate levels in rinse solutions.
-
Bacterial Endotoxin: Aqueous extraction contains < 0.25 EU/mL, meeting USP <85> requirements.
5. Quality Assurance and Environment
-
Integrity: Each cartridge/filter passes 100% integrity testing before leaving the factory.
-
Production Environment: All products are manufactured in a 100,000 class clean room.
-
Product Parameters
Typical Applications
Related components
Related Equipment
Message consultation
Contact
Hotline: (+86)400-820-6150
Email: marketing@feature-tec.com
Address: 8/F, Block A, Building 3, Tianhua Information Technology Park, 299 Longcao Road, Xuhui District, Shanghai